Friedrich VPRG4 Manuale Utente Scaricare il pdf (Pagina 1)

VPRG4

Parts Included in this Kit

 VPRG4 Return Air Grille / Access Panel

(58" Tall x 29" Wide)

 2x Mounting Bracket (left and right)

 Mounting Screws

Parts not Included in this Kit

 25" x 20" Filter

 5/32" Allen wrench for latch

mechanism operation

Frame and sheetrock the access hole to 27" wide

and 55

" tall. The bottom of the opening should

be at the same level as the ﬂoor or subbase. The

chassis must ﬁt thru this opening. The chassis is

" wide and 32

" or 47" tall (consult chassis

speciﬁcations for actual dimensions).

25" x 20" Nom. Filter

(ﬁeld supplied)

VPRG4

Return Air Grille /

Access Panel

920-134-04 (2-10)

Filter mounts on

inside of door.

Side Bracket

Installation Instructions

Return Air Grille/Access Panel

For Vert-I-Pak A Series Units only

Please read these instructions completely before attempting installation.

NOTE: These instructions apply to Vert-I-Pak Series units only. Refer to Chassis Installation/Operation Manual

for additional information

1 2 3 4 5

Sommario

Pagina 1 - Installation Instructions

. VPRG4Parts Included in this Kit VPRG4 Return Air Grille / Access Panel (58" Tall x 29" Wide) 2x Mounting Bracket (left and right) Mo

Pagina 2

. VPRG4Parts Included in this Kit VPRG4 Return Air Grille / Access Panel (58" Tall x 29" Wide) 2x Mounting Bracket (left and right) Mo

Pagina 3 - Right hinge

Step 1Determine the orientation of the door.The VPRG4 Kit comes with two mounting hinges. One mounts to the left side of the opening and locates the r

Pagina 4

Step 6A Slide the bracket upward and tighten the mounting screws.Mount the Door on the Side BracketMounting LatchInstalling Latch BracketLatch Bra

Pagina 5

Reference LineStep 6B Slide the bracket downward and tighten the mounting screws.Mount the Door on the Side BracketMounting LatchInstalling Latch Brac